NOTE: Sparrow NW20 is covered with special discount conditions.

Only a 3% discount for proforma/online payments and a 3% discount for purchases through our online store is applied to the list price.

Sparrow NW20

Industrial LTE router with Wi-Fi module

Manufacturer: Elmatic
Manufacturer: Elmatic
  • Baudrate up to 115200 bps
  • Dual SIM
  • 4G LTE/3G/GPRS
  • Wi-Fi module - AP/client mode
  • Input voltage range from 9 to 36 VDC
  • Dimensions: 82,8 mm x 90 mm x 28,8 mm
  • Installation on DIN rail
  • Aluminium housing
  • IP30 protection
 
Price from €157.00 Net price

High price? Log in and buy cheaper

In stock

Place the order by 12:00, the package will be shipped on the same day

Free shipping from €300

See 1 model

Promocja cenowa na model HDR-15-5

Models

  • ModelAvailabilityWarrantyWishlist
    Your Price
    Your Price
    Elmatic SPARROW NW20
    Industrial Cellular Router, LTE, 2xSIM, Ethernet, WiFi, serial interface 1 x RS-232 (3 PIN) + 1 x RS-485, DIN rail mounting, AC adapter and antennas included
    In stock
    Warranty:
    €157.00
    €193.11
    Login to check your price
    Elmatic SPARROW NW20
    Industrial Cellular Router, LTE, 2xSIM, Ethernet, WiFi, serial interface 1 x RS-232 (3 PIN) + 1 x RS-485, DIN rail mounting, AC adapter and antennas included
    Availability:
    In stock
    Net price:
    €157.00

Description

Sparrow NW20 is an industrial LTE router with Wi-Fi and VPN support at a smart price. As for interfaces, it has Ethernet, RS-232, RS-485, 2 SIM card slots and 2 antenna connectors. 

Sparrow NW20 offers a lot of features known from more expensive models, like "Connection Manager" that controls connection status, VLANs, ACLs, Port Forwarding (NAT), DMZ, static routing, IP Passtrought, DDNS, SMS control, scheduled restart, GRE, and OpenVPN.

The aluminum design and simple construction make the Sparrow NW20 a robust and reliable device for industrial environments.

Applications for Elmatic Sparrow NW20 LTE Router

The functionality of the Sparrow NW20 router can be enhanced with dedicated extensions (applications). Below is the list of available ones:

AT over COM - An application that allows you to send AT commands to the router via the serial port.

AT over IP - Application sends AT commands to router via TCP/IP protocol.

AT over telnet - Allows you to send AT commands to the router via Telnet protocol.

DMVPN - Adds support for Dynamic Multipoint VPN (Cisco)

Dynamic Routing - Adds support for RIP, OSPF and BGP routing protocols.

IPsec - Adds IPsec technology for creating virtual private networks (VPNs)

L2TP - Adds support for L2TP protocol, or OSI Layer 2 tunneling.

PPTP - Adds support for PPTP protocol, a technology for creating virtual private networks.

SMS Gateway - Adds the ability to send SMS via predefined commands sent to the router's serial port.

VRRP - Adds support for Virtual Router Redundancy Protocol (VRRP).

The above applications can be downloaded at the bottom of this page, in the "Downloads" section.

Technical Specification

  • Mobile interface
Supported bands

LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28/B28A
LTE TDD: B40
WCDMA: B1/B2/B5/B8
GSM: B2/B3/B5/B8

SIM 2 x socket SIM 1,8V / 3V
APN Automatic completion APN
SIM failover Conditions for automatic changeover: low signal, limited data transfer, network access denied, SMS
Controlling the amount of transferred data  Set up custom data limits for both cards SIM
Antennas aamount 2 (MAIN + AUX)
Connector SMA female
  • Ethernet
Ports number 1 x WAN, 1 x LAN or 2 x LAN
Port type Auto 10/100 Mbps auto MDI / MDIX
Magnetic insulation 1,5 kV
  • Wi-Fi
Mode IEEE 802.11b/g/n, Access Point(AP), Client
Transmission speed 150 Mbps
Security WPA, WPA2, WEP, CCMP, TKIP
Frequency band 2.412 - 2.484 GHz (2.4 GHz ISM band)
Antennas 1 x RP-SMA for Wi-Fi antenna
  • Serial ports
Ports number 1 x RS-232 (3-PIN) + 1 x RS-485
Connector Terminals
ESD Protection ± 15 KV
Baudrate 300 bps do 115200 bps
  • Network
Routing Static routing
Dynamic Routing (optional) RIPv1 / v2 OSPF BGP
Network protocols TCP, UDP, IPv4, ICMP, NTP, DNS, HTTP, HTTPS, ARP, PPP, DHCP, IP Passthrough
Connection manager Ping, Timer Reboot ICMP
DHCP Static and dynamic IP address allocation
DDNS Some service providers supported, others can be configured manually
Firewall Flexible access control to the router based on packet data:  TCP UDP ICMP MAC address filtration
SMS Configuration SMS, SMS gate, SMS notification
  • VPN
OpenVPN OpenVPN client support up to 5 OpenVPN tunnels
GRE Layer 2 and layer3, support up to 5 GRE VPN tunnels
IPsec (optional) IKEv1 IKEv2 support up to 5 IPsec VPN tunnels
DMVPN (optional) Dynamic multi-point virtual private networks DMVPN
PPTP / L2TP (optional) PPTP or Point to Point Tunneling Protocol and L2TP or layer 2 Tunneling Protocol (L2TP)
  • Monitoring and management
Web GUI Firmware update HTTP / HTTPS
Command line interface SSHv2 and TELNET
Management platform Central management platform
  • Power
Connector 7-pins female socket 3,5 mm
Input voltage range 9 to 36 VDC
Energy consumption Idle: 50 mA@12 V
Data link: 200 mA (peak) @12 V
  • Physical Specification
Watchdog Integreted watchdog
LEDs SYS NET USR RSSI x 3 (signal power)
Reset button Reset button / factory reset
IP protection level IP30
Housing and weight Aluminium, 220 g
Dimensions 103.8 mm x 82.8 mm x 28.8 mm
Installation DIN rail
Working temperature -40°C to 75°C
Working humidity 5% to 95% no condensation
  • Standards and certificates
EMI EN 55032:2012 class B
EMS

IEC 61000-4-2 ESD: level 4
IEC 61000-4-3 RS: level 3
IEC 61000-4-4 EFT: level 3  
IEC 61000-4-5 Surge: level 3
IEC 61000-4-6 CS: level 3
IEC 61000-4-12: level 3

Vibration EN50155

Download

Recommended Products